Pourable Epoxy Patch for Repairing Cracks and Joints

CRACK-CRETE is a semi-rigid epoxy that is used to repair narrow cracks in concrete floors. It is very easy to mix and apply. Crack-Crete is a pourable epoxy that dries to a hard surface yet retains a certain amount of flexibility to compensate for slab movement.

CRACK-CRETE bonds to all clean and dry concrete surfaces. It holds tight and will not lose its bond or crack out when exposed to temperature extremes and tough trafic conditions.

Us Crack-Crete to fill and repair cracks in concrete floors less than 1/2" wide. Crack-Crete is easy to install even by the most inexperienced workman. All components are factory premeasured so mixing mistakes are impossible.

Technical Data
Coverage: 200 lin ft. of 1/2" x 12" cracks Gel Time: 25 Minutes
Packaging: 5 Gallon Pails Solids Content: 100%
Color: Natural, Red, and Gray Flash Point: 230°F
Dry Time: Overnight @ 70°F Pot Life @ 45°F: 30 Minutes
Crack-Crete is very easy to install. Cracks and joins must be clean and dry prior to appliction. You can use a portable heater or torch to dry the floor. Crack-Crete is a 3 componenet epoxy that is packed in a 5 gallon pail. First empty the pail so you can use it to mix the product. Pour the liquid Resin and Hardener into the pail and stir until mixed. Slowly add the Aggregate and mix in. Pour the mixed epoxy into the crack and scrape off the excess. Allow to dry before opening to traffic.