USDA Approaved Floor Patch for Room Temperatures
Between 20°F to 40°F

Patch Your Cooler Floors Without Turning off Your Refrigeration Equipment!

COOLER CRETE is a 100% solids epoxy mortar that was designed specifically for cold storage areas in the food processing industry. It has the ability to set quickly in cold processing areas where the temperature is as low as 20°F! All repairs are traffic serviceable after an overnight cure!

COOLER CRETE can be used to patch and completely resurface worn and eroded concrete. Use it to patch cracks and holes without elevating the temperature! Cooler Crete is extremely strong and will stand up to brutal steel wheel traffic and pounding impact! Its unique epoxy base allows it to withstand harsh chemcial spillages without damage.

With Cooler Crete all repairs are permanent. It bonds like glue without a primer to all cold concrete and tile surfaces. Use it in warm rooms for a fast setting patch.

Technical Data
Coverage: 50 sq. ft. @ 1/8" Flexural Strength: 10,350 psi
Packaging: 5 Gallon Pails Tensile Strength: 6,030 psi
Color: Natural Tan, Gray, and Red Compressive Strength: 13,000 psi
Dry Time: Overnight @ 30°F Pot Life @ 30°F: 20 Minutes
Application
Cooler Crete is very easy to install. The floor must be clean and dry prior to application. Use a strong cleaner or acid etch muriatic acid. Rinse the floor and allow to dry. You can use a portable heater or torch to dry the floor. Cooler Crete is a 3 component epoxy that is packed in a 5 gallon pail. First empty the pail so you can use it to mix the product. Pour the liquid Resin and Hardener into the pail and stir until mixed. Slowly add the Aggregate and continue to stir until blended. Pout onto the floor and trowel in place. Cooler Crete Sets Fast! Be sure to mix right next to the area you are patching.